Sunday, December 1, 2013

Lady Grey


lady grey all natural handmade tea soap
Lady Grey
This soap did not go as planned.  To start with I tried to fill my mold with squirt bottles.  Let me just say, NEVER again.  It took forever and all of my soap thickened way too quickly.

making lady grey soap
Adding the soap coloring
I made a nice recipe and separated the soap into 2 medium containers and 1 large.  In the large I added madder oil to make a pink.  To the mediums I added titanium dioxide and activated charcoal respectively.  I mixed everything by hand so as to not accelerate trace.  After filling my squirt bottles, I started filling my mold.

I started with a layer of pink, followed by alternating black, pink, white, pink and so forth.  I finally gave up on using the squirt bottles when the soap got too thick to squeeze out of the bottles.  At this point I just made thin layers with a spatula.

After getting all of my soap in my molds, I insulated the whole thing.  After checking on it I found that I had some water pooling from adding water to the squeeze bottles to get as much of the soap out as possible.  This water was added after the soap had been at trace for about half an hour so I wasn't worried about lye being in the liquid.  I put the soap in the oven at 170* for about a half hour.  After an hour it still looked like it had too much liquid so I did another half hour @ 170*.  Then I left the soap in the oven without opening it for the night.  I got busy and forgot to take it out.  BIG mistake!

lady grey all natural handmade tea soap
All trimmed neat & tidy
I made this soap on Saturday.  Sunday morning I woke up with a migraine.  My husband came home from church and started pre-heating the oven for biscuits, at 475*.   And yes my soap was still in the oven!  Yikes!!!!  He had asked me to come help him in the kitchen for a minute, and I was wondering what I was smelling.  I decided to check the oven.   I found the soap.  I had lined my mold with a small trash liner and it had melted.  So did the bungee cord that I had used to secure the mold closed.  Not only did it effect my soap, but my oven was a mess also.

We promptly carried the soap outside to cool.  After the soap had cooled completely, I started unmolding it.  I started by cutting the bungee cord off.  Next I took the soap out of the mold.  The liner had melted to the soap.  I cut all six of the sides off of the soap.  I took about a half inch off of each side.  I sliced the remaining soap in half length wise, before slicing it into bars.

I know that I will do a different design next time, and hopefully I won't loose any soap.


I am linking with the following blogs:
http://back2basichealth.blogspot.com
http://www.create-with-joy.com
http://teachingwhatisgood.com/
http://cupcake-n-bake.blogspot.com
http://alifeinbalance.net
http://thediydreamer.com
http://www.the-chicken-chick.com
http://lavendergardencottage.blogspot.com
http://www.flusterbuster.com
http://www.time-warp-wife.blogspot.com
http://www.bystephanielynn.com
http://blackfoxhomestead.com/
http://www.iamannekehn.blogspot.com
http://nourishingjoy.com

3 comments:

  1. Oh no! Isn't it frustrating to spend time on a project and have something crazy like this happen? Thanks for sharing this at Frugal Crafty Home Blog Hop!

    ReplyDelete
  2. What a soap making story! Sorry about the troubles but your soap looks neat anyway!

    ReplyDelete
  3. I so love hearing about your soap making escapades! Thanks! -Marci @ Stone Cottage Adventures

    ReplyDelete

Thank you so much for stopping by.